Authorized AMSOIL Dealer
JONATHAN L LACKMAN
Castle Pines, CO
Independent AMSOIL Dealer · Jonathan Lackman · Denver, CO Ships nationwide from AMSOIL · Not the official AMSOIL site

AMSOIL DOT 3 and DOT 4 brake fluid

I earn a commission when you buy or join through my links · Disclosure

Quick answer

Use AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid (BFLV) in passenger-car, light-truck and powersports systems that require a DOT 3, DOT 4 or DOT 5.1 fluid. AMSOIL says the product exceeds those DOT specifications, is low-viscosity (817 cSt) for cold-weather and ABS response, and has wet boiling points that stay beyond DOT standards even when contaminated with 3.7 percent water. Do not mix it with DOT 5 (silicone) fluid. Confirm the DOT class in the owner’s manual. AMSOIL recommends changing the fluid every two years for maximum performance, in addition to following the vehicle manufacturer’s interval.

Brake fluid is easy to ignore until the pedal feels soft. It absorbs water through hoses, seals and the reservoir cap, and that water lowers the boiling point. AMSOIL’s street brake fluid is a DOT 3 and DOT 4 synthetic, and AMSOIL also rates it for systems that require DOT 5.1.

What it is (and what it isn’t)

AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid (BFLV) is for passenger-car, light-truck and powersports applications that require DOT 3, DOT 4 or DOT 5.1. Do not mix it with DOT 5 silicone fluid. DOT 5 is a different chemistry.

On the current product page, AMSOIL states that the fluid:

  • Exceeds DOT 3, 4 and 5.1 specifications
  • Fights water contamination, with wet boiling points that remain beyond DOT standards even when contaminated with 3.7 percent water
  • Uses a nitrogen blanket in the bottle during manufacturing to purge moisture
  • Has a low viscosity of 817 cSt, which AMSOIL ties to cold-weather performance and ABS / traction-control response
  • Helps maintain a firm pedal by resisting boil-off and vapor lock

I am not publishing dry or wet boiling-point numbers that are not on that product page. If you need the exact figures, use AMSOIL’s data bulletin linked from the product page.

Some vehicles, including the 2024 Mustang 5.0 on AMSOIL’s lookup, call for a Ford-specific low-viscosity DOT 4 fluid (Motorcraft DOT 4 LV, WSS-M6C65-A2 or ISO 4925 class 6). I will not claim BFLV carries that Ford or ISO approval unless AMSOIL lists it. Confirm those callouts on the lookup and in the manual.

Honda often specifies DOT 3. That is the note on the Civic and CR-V lookups. The 2024 4Runner lookup lists FMVSS 116 DOT 3 or DOT 4, with this AMSOIL fluid shown.

AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid (BFLV)

Best for: Passenger cars, light trucks and powersports systems that require DOT 3, DOT 4 or DOT 5.1. Not for DOT 5 silicone systems.

  • Exceeds DOT 3, 4 and 5.1 specifications, per AMSOIL
  • Wet boiling points remain beyond DOT standards even with 3.7 percent water contamination
  • Low-viscosity (817 cSt) formula AMSOIL ties to ABS response and cold-weather performance

Tip: Preferred Customers get member pricing. Join at AMSOIL.com

Shop AMSOIL brake fluid

Change interval

AMSOIL recommends changing this fluid every two years for maximum performance, and says to follow the owner’s manual for the interval and the correct DOT class. Even in a dry climate, moisture gets into the system. Do not leave an opened bottle sitting around for the next job; brake fluid picks up water from the air.

This product is listed as not available in Canada on AMSOIL’s page. If you are ordering from Canada, confirm availability before you rely on it.

DOT, FMVSS, Motorcraft and manufacturer names are used only to identify specifications and compatible vehicles. No affiliation or endorsement is implied. I’m an Independent AMSOIL Dealer, not an AMSOIL INC. employee.

Frequently asked questions

Can I use AMSOIL brake fluid in a DOT 3 or DOT 4 car?
Yes, if the system requires DOT 3, DOT 4 or DOT 5.1. AMSOIL’s DOT 3 and DOT 4 fluid is specified for those applications. Match the class in the manual. Do not use it in a system that requires DOT 5 silicone fluid, and do not mix it with DOT 5.
Is this DOT 5.1 fluid?
AMSOIL says the product exceeds DOT 3, 4 and 5.1 specifications and may be used where a DOT 3, 4 or 5.1 fluid is required. That is AMSOIL’s recommendation, not a reason to ignore a more specific OEM callout (for example a low-viscosity Ford DOT 4 LV spec). Confirm those special cases on the lookup and in the manual.
How often should I change brake fluid?
AMSOIL recommends changing this fluid every two years for maximum performance, and says to follow the owner’s manual for the proper interval and DOT classification. Brake fluid is hygroscopic (it attracts moisture), which is why a calendar interval matters even if the fluid still looks clean.
Will this work in my motorcycle or Honda?
If the system requires DOT 3, 4 or 5.1, AMSOIL lists powersports along with passenger cars and light trucks. Honda often specifies DOT 3; the Civic and CR-V lookups on this site follow that pattern. Confirm the bottle against the manual before you open the reservoir.

Sources

Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.

  1. AMSOIL DOT 3 and DOT 4 100% Synthetic Brake Fluid (BFLV)