Authorized AMSOIL Dealer
JONATHAN L LACKMAN
Castle Pines, CO
Independent AMSOIL Dealer · Jonathan Lackman · Denver, CO Ships nationwide from AMSOIL · Not the official AMSOIL site

AMSOIL heavy-duty diesel coolant (ANTHD)

I earn a commission when you buy or join through my links · Disclosure

Quick answer

AMSOIL Heavy-Duty Antifreeze & Coolant (ANTHD) is a 50/50 ethylene-glycol premix that uses a hybrid organic acid (HOAT) formula. AMSOIL says it does not require supplemental coolant additives (SCAs) or extenders, and rates it for up to 1,000,000 miles, 20,000 hours or 8 years, whichever comes first, in heavy-duty and off-road applications. It is phosphate-, nitrite-, silicate-, borate- and amine-free. AMSOIL reports virtually no corrosion in ASTM D2570 testing and virtually no cavitation in the ASTM D7583 (John Deere) cavitation test. This is a different product from AMSOIL’s passenger-car coolant (ANTPC). Confirm the live recommendation in AMSOIL’s lookup and in your owner’s manual, especially if the manual requires a specifically licensed coolant.

The passenger-car coolant page covers AMSOIL’s OAT formula (ANTPC) and DOMINATOR Coolant Boost. This page is the other jug: AMSOIL Heavy-Duty Antifreeze & Coolant (ANTHD), the product meant for heavy-duty and off-road cooling systems, including many wet-sleeve diesels.

I run a 2019 F-350 6.7 Power Stroke, so this is a product I pay attention to. I still will not claim a Ford approval that AMSOIL’s current bulletin does not list. Confirm your truck on AMSOIL’s lookup and in the owner’s manual before you flush a system.

What ANTHD actually is

AMSOIL’s current product page and data bulletin (G3347, dated 2/24) describe ANTHD as:

  • An ethylene-glycol 50/50 premix with high-purity water (ready to pour; do not add water)
  • A proprietary hybrid organic acid (HOAT) formula, with anti-scalant, anti-fouling and water-pump lubrication additives
  • Fully formulated: it does not require supplemental coolant additives (SCAs) or extenders
  • Phosphate-, nitrite-, silicate-, borate- and amine-free
  • Freeze protection down to -34°F (-37°C)
  • Boil-over protection up to 265°F (129°C) with a 15 psi radiator cap
  • Compatible, AMSOIL says, with all other antifreeze and coolant colors, and with cooling-system plastics and elastomers (hoses, gaskets and so on)
  • Protection for aluminum, steel, cast iron, copper, brass and solder alloys

Service life, per AMSOIL, is up to 1,000,000 miles (1,609,344 km), 20,000 hours or 8 years, whichever comes first, in heavy-duty and off-road applications. The same bulletin says ANTHD can be used in non-heavy-duty vehicles, but then the drain interval drops to 150,000 miles or five years, whichever comes first. AMSOIL also calls it the better single-coolant choice for mixed fleets that want one product for both heavy-duty and passenger equipment.

AMSOIL Heavy-Duty Antifreeze & Coolant (ANTHD)

Best for: Heavy-duty and off-road cooling systems, including many wet-sleeve diesels, where a fully formulated HOAT coolant that does not need SCAs is allowed by the manual and by AMSOIL’s lookup.

  • 50/50 premix; AMSOIL says do not add water
  • No SCAs or extenders required
  • Up to 1,000,000 miles, 20,000 hours or 8 years in heavy-duty and off-road use
  • Nitrite-free; AMSOIL reports strong ASTM D7583 cavitation-test results

Tip: Preferred Customers get member pricing. Join at AMSOIL.com

AMSOIL sells ANTHD as a gallon jug, a case of four gallons, a 55-gallon drum and a 275-gallon tote. I don’t post prices; AMSOIL shows retail and member prices on the product page.

Why a diesel often needs a different coolant

Many heavy-duty diesels use wet cylinder liners. Those liners can suffer cavitation: tiny vapor bubbles form and collapse on the coolant side of the liner and, over time, pit the metal. Conventional diesel coolants have long used nitrites (often as part of an SCA package) to build a sacrificial layer on the liner.

AMSOIL takes a different route. The bulletin says ANTHD “effectively protects cylinder liners against cavitation erosion/corrosion pitting, without the problems associated with nitrite technology.” AMSOIL notes that nitrites can cause aluminum corrosion, and that a growing number of manufacturers in both the heavy-duty and automotive markets are banning them. The published evidence AMSOIL points to is the ASTM D7583 John Deere cavitation test: in third-party testing, “cylinder liners protected by AMSOIL show virtually no signs of cavitation.” Corrosion results are cited from ASTM D2570, where cast-iron and copper plates “show virtually no signs of corrosion.”

That is also why you should not assume Passenger Car & Light Truck Antifreeze & Coolant (ANTPC) is the automatic fill in a Super Duty, a Cummins or a heavy Duramax. ANTPC is an OAT passenger-car and light-truck coolant with a shorter published interval. ANTHD is the heavy-duty product with the cavitation story and the million-mile rating.

AMSOIL ANTPC vs ANTHD, per data bulletin G3347 (2/24)
Passenger Car & Light Truck (ANTPC)Heavy-Duty (ANTHD)
ChemistryPoly-organic acid (OAT)Hybrid organic acid (HOAT)
Mix50/50 ethylene-glycol premix50/50 ethylene-glycol premix
Published service lifeUp to 150,000 miles or 5 years in cars and light trucksUp to 1,000,000 miles, 20,000 hours or 8 years in heavy-duty and off-road use
If used outside that categoryFormulated for passenger cars and light trucks150,000 miles or 5 years in non-heavy-duty vehicles
SCA / extendersNot an SCA productFully formulated; does not require SCAs or extenders
Nitrite, phosphate, silicate, borate, amineFree of those (ANTPC is also nitrate-free)Free of those
Cavitation claimNot the heavy-duty cavitation productASTM D7583 (John Deere) cavitation test; virtually no signs of cavitation, per AMSOIL
Freeze / boil-over (15 psi cap)-34°F / 265°F-34°F / 265°F
Figures are AMSOIL’s published ratings, whichever comes first for the mileage/time limits. Always confirm the product against your owner’s manual and AMSOIL’s live lookup.

SCAs: the maintenance problem this formula is built to skip

On conventional diesel coolant, the inhibitors are sacrificial. Halfway through a short interval you test the coolant (often with strips) and add an SCA to put the protection back. Add too little and cavitation or corrosion can start. Add too much and additives can drop out as sludge and scale, which hurts heat transfer. AMSOIL’s own blog, “Do I need a diesel coolant additive?”, walks through that hassle and says you do not need an SCA if you are using AMSOIL antifreeze and coolant.

ANTHD is sold as a fully formulated HOAT fill. The maintenance AMSOIL does specify is simpler: do not add water, do not open a hot radiator, dispose of new or used coolant as hazardous waste under local rules, check and maintain the level at every oil change, and follow the owner’s manual for any additional top-off guidance.

That does not make coolant a “fill it and forget it for a million miles” product if the system is leaking, contaminated or overdue for a mechanical repair. The published interval assumes a healthy system and a complete fill of this formula.

“Suitable for use” is not the same as a formal OEM license

Here is the limitation, stated plainly: AMSOIL does not present ANTHD as a formally licensed Motorcraft, CAT EC-1, or similar boxed OEM coolant on the current G3347 bulletin. What the bulletin does say is:

Use in applications requiring any of the following specifications:

  • ASTM D3306, D6210, D7583, D7820
  • TMC RP329B, TMC RP338
  • AS/NZS 2108.2004 Type A

Suitable for use with the following (AMSOIL’s wording, G3347 2/24):

  • Case New Holland
  • Cummins 14603 and Cummins 3666132
  • DDC 7SE 298 and 93K217
  • Freightliner 48-22880
  • GM Heavy Truck
  • International Truck and Engine / Navistar CEMS B-1 Type III-A
  • JIS K2234
  • MAN 324 NF
  • MB DBL 7700, MB-Approval 325.3
  • MTU MTL 5048
  • Kenworth RO26-170-97
  • Mack 014GS17004 and 014GS17009
  • PACCAR CS0185
  • DAF MAT 74002
  • Peterbilt 8502.002
  • Scania TB1451
  • Volvo Heavy Truck

Those OEM names and numbers are AMSOIL’s suitable-for-use list. I am not going to treat “MB-Approval 325.3” on that list as a Mercedes license document in your glovebox, and I will not add older callouts (including Caterpillar EC-1 or Ford Motorcraft) that appear on some third-party dealer pages but are not on this February 2024 bulletin.

If your manual requires a specifically licensed coolant, follow the manual, especially while the truck is under warranty. Then use AMSOIL’s vehicle lookup for the current recommendation. For the broader warranty question, see Does AMSOIL void your warranty?.

Mixing, top-off and freeze protection

Because ANTHD is a 50/50 premix, adding water lowers freeze and boil-over protection and changes the inhibitor concentration. AMSOIL’s direction is simple: do not add water.

AMSOIL says the fluid is compatible with other ethylene-glycol and propylene-glycol coolant colors. The catch it flags is prediction, not a claim that every mixture is ideal: mixing the two glycol types can make freeze protection hard to calculate. If you have to top off that way, flush at the next convenient opportunity.

The published freeze rating is -34°F (-37°C) at this 50/50 mix. That covers typical Front Range winters and most Colorado mountain mornings. It is not a reason to water the mixture down, and it is not anti-gel for the fuel. For gelling, treated fuel, and block-heater habits, use the diesel winter-prep guide and diesel fuel additives. Coolant Boost, covered on the AMSOIL coolant page, is a separate additive, not a substitute for a correct antifreeze fill.

Cummins, Detroit Diesel, Freightliner, Ford, Super Duty, Power Stroke, Duramax, PACCAR, Kenworth, Peterbilt, Mack, Volvo, International, Navistar, Case, New Holland and Mercedes-Benz are trademarks of their respective owners, used only to identify applications and published specifications. No affiliation or endorsement is implied. I’m an Independent AMSOIL Dealer, not an AMSOIL INC. employee.

Frequently asked questions

What is the difference between AMSOIL passenger-car coolant and heavy-duty coolant?
ANTPC is a poly-organic acid (OAT) 50/50 premix that AMSOIL rates for up to 150,000 miles or five years in passenger cars and light trucks. ANTHD is a hybrid organic acid (HOAT) 50/50 premix aimed at heavy-duty and off-road use, including cylinder-liner cavitation protection, with AMSOIL’s longer 1,000,000-mile, 20,000-hour or 8-year rating. Do not assume the passenger-car jug is the right fill for a wet-sleeve diesel.
Does AMSOIL heavy-duty coolant need an SCA?
No. AMSOIL’s product page and the G3347 data bulletin both say ANTHD is fully formulated and does not require supplemental coolant additives or extenders. That is the point of this HOAT formula, compared with conventional nitrited diesel coolants that need SCA testing and recharge. Follow AMSOIL’s directions: do not add water, and check the level at every oil change.
How long does AMSOIL heavy-duty coolant last?
In heavy-duty and off-road applications, AMSOIL rates ANTHD for up to 1,000,000 miles, 20,000 hours or 8 years, whichever comes first. If you use it in a non-heavy-duty vehicle, the bulletin shortens that to 150,000 miles or five years, whichever comes first. Those are AMSOIL’s published service-life figures, not a reason to ignore a shorter interval in your owner’s manual, especially during the OEM warranty.
Is AMSOIL heavy-duty coolant approved for Cummins, Duramax or Power Stroke?
AMSOIL lists ANTHD as suitable for use with a set of OEM specifications on bulletin G3347 (2/24), including Cummins 14603 and 3666132, Detroit Diesel 7SE 298 and 93K217, and GM Heavy Truck. That is AMSOIL’s suitability claim, not the same thing as a formal OEM license in your glovebox. Ford Super Duty / Motorcraft callouts are not on that current list, so I will not invent a Power Stroke approval. Confirm your year and engine on AMSOIL’s lookup and follow the manual if it requires a specifically licensed coolant.
Can I mix ANTHD with the coolant already in the truck?
AMSOIL says its coolants are compatible with all ethylene and propylene antifreeze colors, and with the plastics and elastomers in cooling systems. Mixing ethylene-glycol and propylene-glycol formulas can make freeze protection hard to predict; if you have to top off that way, AMSOIL recommends flushing at the next convenient opportunity. Do not add water to this 50/50 premix.
Does coolant keep diesel fuel from gelling?
No. Coolant protects the cooling system against freeze, boil-over, corrosion and cavitation. Anti-gel is a fuel treatment. Use Diesel Cold Flow or Diesel 4-IN-1 in the tank, and see the diesel winter-prep guide. A block heater helps the coolant and the oil; it does not treat the fuel.

Sources

Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.

  1. AMSOIL Heavy-Duty Antifreeze & Coolant (ANTHD)
  2. AMSOIL Antifreeze & Coolant data bulletin (G3347, 2/24)
  3. AMSOIL Blog: Do I need a diesel coolant additive?
  4. AMSOIL Passenger Car & Light Truck Antifreeze & Coolant (ANTPC)