Authorized AMSOIL Dealer
JONATHAN L LACKMAN
Castle Pines, CO
Independent AMSOIL Dealer · Jonathan Lackman · Denver, CO Ships nationwide from AMSOIL · Not the official AMSOIL site

Does AMSOIL P.i. work?

I earn a commission when you buy or join through my links · Disclosure

Quick answer

AMSOIL P.i. is a concentrated gasoline fuel-system cleaner. In current AMSOIL literature (product page and data bulletin G1135, October 2024), third-party testing of a 2016 Chevrolet Silverado 1500 5.3L GDI with 100,616 miles showed a 14% horsepower improvement after one treated tank, and ASTM D5598(M) testing in a 2013 Buick Regal showed GDI injectors restored to a 100% flow rate after one tank. It treats up to 30 gallons, is for gasoline cars and trucks only, and AMSOIL recommends using it every 4,000 miles.

P.i. is the gasoline additive people ask me about when a truck has gotten lazy on mid-grade, or a direct-injection engine has accumulated the deposits those injectors are known for. I’m only going to use what AMSOIL currently publishes.

The tests AMSOIL is standing behind right now

Data bulletin G1135 (October 2024) and the current product page report two results:

  1. Horsepower. Third-party testing of a 2016 Chevrolet Silverado 1500, 5.3L GDI, 100,616 miles. The truck was measured on a chassis dyno, driven on one tank treated with P.i. at highway speeds, and measured again. AMSOIL reports a 14% improvement in horsepower. AMSOIL also had the engine disassembled and photographed before and after. Actual results vary; that’s AMSOIL’s own caveat.
  2. GDI injector flow. Testing to ASTM D5598(M) in a 2013 Buick Regal showed P.i. restored GDI fuel injectors to a 100% flow rate after one tank.

AMSOIL describes P.i. as a concentrated detergent that cleans injectors, intake valves and combustion-chamber deposits in both port and direct-injection gasoline systems. The bulletin walks through why those deposits matter: poor spray patterns, valve restriction, carbon rap, and knock that can cost timing and power even when you never hear a ping.

Fuel economy. The current product page and G1135 say P.i. “improves fuel economy” but do not put a percentage on those pages. The official FAQ still quotes older figures: up to 5.7 percent, average 2.3 percent. I’m not going to pretend those are the same study as the 2016 Silverado dyno test.

How to use it

AMSOIL P.i. use directions (G1135 and current product page)
ItemAMSOIL’s direction
What it’s forGasoline-powered cars and trucks
Treat rateOne 12 oz. bottle treats up to 30 gallons; add the entire bottle at fill-up
Larger tanksTwo bottles; more than two per treatment is not recommended
How oftenEvery 4,000 miles (6,400 km) for best results
E85 / oxygenated gas / cats / O2 sensorsAMSOIL says it is safe for these
Capless fillersBottle is designed to work with capless fuel systems
Do not use inDiesel engines or two-stroke engines

AMSOIL P.i. Performance Improver Gasoline Additive (API)

Best for: Gasoline cars and trucks that need a one-tank fuel-system cleaning treatment.

  • Restores up to 14% horsepower in the 2016 Silverado 5.3 GDI test described above
  • Restored GDI injector flow to 100% after one tank (ASTM D5598(M), 2013 Buick Regal)
  • Treats up to 30 gallons; repeat every 4,000 miles per AMSOIL

Tip: Preferred Customers get member pricing. Join at AMSOIL.com

What about PEA, Quickshot and diesel?

“Does it have PEA?” is one of the most-typed questions, and AMSOIL simply doesn’t answer it on the current P.i. page or G1135. I won’t fill that in from a forum SDS quote. If AMSOIL names the chemistry later, I’ll update this page.

For ethanol-related problems (phase separation, water, gum in small engines and powersports), AMSOIL points people to Quickshot, not P.i. The official FAQ says AMSOIL gasoline additives can be used together if each one fits the job. For seasonal storage, Gasoline Stabilizer is the product AMSOIL tested against Sea Foam in a triple-length ASTM D525 oxidation-stability test on the current Performance Tests page.

Diesel owners should ignore P.i. entirely. Use the diesel fuel additives guide, and for gelling and Colorado cold starts see diesel winter prep.

See P.i. at AMSOIL.com Preferred Customer pricing

Chevrolet, Silverado, Buick and Regal are trademarks of General Motors; Sea Foam is a trademark of its owner. Used only to identify test vehicles and comparison products. No affiliation or endorsement is implied. I’m an Independent AMSOIL Dealer, not an AMSOIL INC. employee.

Frequently asked questions

Does AMSOIL P.i. contain PEA?
AMSOIL does not name the detergent chemistry (PEA or otherwise) on the current P.i. product page or on data bulletin G1135. I won’t guess from unofficial SDS roundups. What AMSOIL does publish are the deposit-cleaning tests above and the use directions.
Does P.i. improve fuel economy?
The current product page and G1135 say P.i. improves fuel economy, without a percentage on those pages. AMSOIL’s official FAQ still cites older fuel-efficiency figures of up to 5.7 percent and an average of 2.3 percent. I’m giving you both sources rather than blending them into one new number.
Can I use P.i. in a diesel or a two-stroke?
No. AMSOIL says do not use P.i. with diesel or two-stroke engines. For diesel injectors and winter fuel, use the diesel fuel additives guide and, in cold weather, the diesel winter-prep guide.
Can I mix P.i. with Quickshot or Gasoline Stabilizer?
AMSOIL’s FAQ says its gasoline fuel additives are compatible with each other, and you should still pick the additive that matches the job. P.i. is the concentrated deposit cleaner. AMSOIL also offers Quickshot for ethanol-related problems and Gasoline Stabilizer for storage. The current Performance Tests page includes a dated stability test of the stabilizer versus Sea Foam.
How do I use it, and is it safe for capless fillers and E85?
Add the entire 12-ounce bottle at fill-up. It treats up to 30 gallons; for a larger tank AMSOIL says to use two bottles and not more than two per treatment. AMSOIL says it is safe for catalytic converters, oxygen sensors, oxygenated gas and E85, and that the bottle is compatible with capless fuel systems. For best results, AMSOIL recommends a treatment every 4,000 miles.

Sources

Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.

  1. AMSOIL P.i. Performance Improver product page
  2. AMSOIL P.i. data bulletin (G1135, 10/24)
  3. AMSOIL official FAQ: P.i., mixing gasoline additives, ethanol
  4. AMSOIL Performance Tests (Gasoline Stabilizer vs Sea Foam, among other tests)