Authorized AMSOIL Dealer
JONATHAN L LACKMAN
Castle Pines, CO
Independent AMSOIL Dealer · Jonathan Lackman · Denver, CO Ships nationwide from AMSOIL · Not the official AMSOIL site

AMSOIL for GDI and EcoBoost engines

I earn a commission when you buy or join through my links · Disclosure

Quick answer

For a gasoline direct-injection or EcoBoost engine, start with the viscosity and specification in the owner’s manual (many Ford EcoBoost trucks specify 5W-30), then choose an AMSOIL line that lists that spec. Signature Series is AMSOIL’s top gasoline oil for these engines: after 25,000 miles of use, AMSOIL reports 4X more piston protection against LSPI than the industry standard required, in aged-oil Sequence IX testing (G2880 / Performance Tests). Injector deposits are a separate job; that’s P.i., not a thicker oil. For a worked F-150 3.5 EcoBoost kit, use that vehicle page rather than this guide.

Turbocharged gasoline direct injection (Ford’s EcoBoost, GM’s GDI V8s, a lot of four-cylinders) puts two problems on the oil that an older port-injected V8 didn’t emphasize the same way: low-speed pre-ignition (LSPI) and injector deposits. The fix is not “run a thicker oil.”

Match the manual first

Use the viscosity and specification in the owner’s manual, then confirm it in AMSOIL’s lookup. Many EcoBoost F-150s specify 5W-30. A 3.5 EcoBoost worked example, with capacities, the EAO17 filter and the 10R80 fluid, is already on F-150 3.5 EcoBoost. This page does not repeat that kit.

If you want the longest published gasoline interval, that’s Signature Series. If you want the OEM interval and the AMSOIL line that AMSOIL calls API-licensed, that’s OE. The differences are on Signature Series vs XL vs OE.

LSPI is why the oil chemistry matters

LSPI is an abnormal combustion event that can damage pistons at low speed and high load, the exact situation a turbo truck sees when you roll into the throttle in a high gear. AMSOIL’s current Signature Series bulletin (G2880, November 2026) and Performance Tests page report that after 25,000 miles of use, Signature Series 5W-30 delivered 4X more piston protection against LSPI than the industry standard required, in aged-oil Sequence IX testing.

That aged-oil piece is the point. A fresh-bottle test is easier. AMSOIL published the after-25,000-miles case because that’s how Signature Series is meant to be used.

AMSOIL Signature Series 5W-30 synthetic motor oil quart bottle

AMSOIL Signature Series 5W-30 100% Synthetic Motor Oil (ASL)

Best for: GDI and EcoBoost engines whose manual and AMSOIL lookup call for 5W-30, and owners who want AMSOIL’s longest published gasoline interval plus the aged-oil LSPI result.

  • 4X more LSPI piston protection than required after 25,000 miles of use (aged Sequence IX, G2880)
  • Guaranteed protection up to 25,000 miles or 1 year in normal service (15,000 miles or 700 hours severe), with an AMSOIL filter
  • Confirm viscosity in the lookup. Don’t assume every GDI engine is 5W-30

Tip: Preferred Customers get member pricing. Join at AMSOIL.com

Deposits are a fuel-system job

On a GDI engine the injector tip lives in a harsh place, and some intake valves no longer get washed by port fuel. Changing oil viscosity will not substitute for a cleaner. AMSOIL P.i. is the gasoline additive I recommend for that job.

Current P.i. documents (G1135, October 2024) report GDI injectors returned to 100 percent flow in ASTM D5598(M) testing on a 2013 Buick Regal, and 14 percent horsepower restored in a 2016 Silverado 5.3 GDI with 100,616 miles after one tank. P.i. treats up to 30 gallons, is recommended every 4,000 miles, and is not for diesel. More detail, including the fuel-economy wording, is on P.i. and Does AMSOIL improve fuel economy?.

AMSOIL P.i. Performance Improver (API)

Best for: Gasoline GDI and EcoBoost engines when you want AMSOIL’s one-tank injector and valve cleaner.

  • GDI injectors to 100 percent flow in AMSOIL’s ASTM D5598(M) test (2013 Buick Regal)
  • Treats up to 30 gallons; recommended every 4,000 miles

Tip: Preferred Customers get member pricing. Join at AMSOIL.com

2020 F-150 3.5 EcoBoost kit / lookup

Ford, F-150 and EcoBoost are trademarks of Ford Motor Company. Chevrolet, Silverado, Buick and Regal are trademarks of General Motors. Used only to identify compatible vehicles and AMSOIL’s published test engines. No affiliation or endorsement is implied. I’m an Independent AMSOIL Dealer, not an AMSOIL INC. employee.

Frequently asked questions

What oil should I use in an EcoBoost or other GDI engine?
The oil that matches the viscosity and OEM or API specification in your manual. Many Ford EcoBoost applications specify 5W-30. AMSOIL’s lookup will show Signature Series, Extended-Life or OE in that grade. Don’t step up to a heavier oil for ‘turbo protection’ if the manual calls for 5W-30 or 0W-20.
Does Signature Series protect against LSPI?
Yes, in AMSOIL’s published testing. After 25,000 miles of use, Signature Series 5W-30 delivered 4X more piston protection against low-speed pre-ignition than the standard required, in AMSOIL’s aged-oil Sequence IX work (G2880 and the Performance Tests page). That’s an aged-oil result, which is the relevant case for a long drain.
Will a different oil clean GDI intake valves?
Motor oil is not a substitute for fuel-system cleaning on GDI engines, where the injector spray and the intake valves don’t always see the same fuel wash. AMSOIL P.i. is the gasoline additive I point people to for injector and valve deposits. It treats up to 30 gallons and is recommended every 4,000 miles.
Where is the F-150 3.5 EcoBoost oil change kit?
On the F-150 3.5 EcoBoost kit page. This guide is about LSPI, viscosity and P.i., not a second copy of that lookup.

Sources

Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.

  1. AMSOIL Signature Series data sheet (G2880, 11/26)
  2. AMSOIL Performance Tests
  3. AMSOIL P.i. data bulletin (G1135, 10/24)
  4. AMSOIL lookup: 2020 F-150 3.5L EcoBoost