AMSOIL oil and CVT fluid for Subaru
Quick answer
For a 2026 Subaru Outback 2.4L FA24 turbo, AMSOIL’s official lookup lists 0W-20 for all temperatures (API SP, synthetic required), 4.8 quarts with the filter, 31 ft-lbs on the drain plug with a new washer, and the OE drain plug only. For the TR690 CVT it recommends AMSOIL 100% Synthetic CVT Fluid, with a 12.6-quart total fill. That CVT fluid is not Subaru-certified; AMSOIL’s bulletin recommends it for the Subaru CVT specifications listed below. Confirm your year and model. A WRX or a different CVT can call for something else.
Subarus are picky about oil viscosity and even pickier about CVT fluid. Everything below for capacities and product calls comes from AMSOIL’s lookup for a 2026 Subaru Outback, 2.4L FA24 turbo (engine code R), plus the CVT fluid bulletin (G3273). I don’t own a Subaru; confirm your year, and don’t assume a WRX, Forester or Ascent is identical.
Engine oil (2026 Outback 2.4 turbo)
| Item | What AMSOIL’s lookup shows |
|---|---|
| Oil grade listed | SP |
| Viscosity | 0W-20, all temperatures; synthetic required |
| Capacity | 4.8 quarts with filter; recheck the level after refill |
| Drain plug | 31 ft-lbs; new washer; OE drain plug only |
2026 Outback 2.4 turbo lookup / kit Look up a different Subaru
Typical gasoline 0W-20 fill
AMSOIL Signature Series 0W-20 100% Synthetic Motor Oil (ASM)
Best for: Gasoline Subarus whose manual and AMSOIL lookup call for 0W-20 / API SP, and owners who want AMSOIL’s longest published gasoline interval.
- 0W-20 as listed on the 2026 Outback lookup
- Guaranteed protection up to 25,000 miles or 1 year in normal service (15,000 miles or 700 hours severe), with an AMSOIL filter
- During a factory warranty, the conservative path is still the OEM interval. See the warranty page
Tip: Preferred Customers get member pricing. Join at AMSOIL.com
Stay inside the viscosity the manual requires. If you want the OEM-interval, API-licensed AMSOIL line instead, that’s OE, not a different viscosity.
CVT fluid: recommended for Subaru specs, not Subaru-certified
AMSOIL’s 2026 Outback lookup lists the TR690 CVT and recommends AMSOIL 100% Synthetic CVT Fluid, with a 12.6-quart total fill.
AMSOIL 100% Synthetic CVT Fluid is not a Subaru-certified or Subaru-licensed fluid. That’s the fact, stated plainly.
What carries the weight is what AMSOIL does document. Data bulletin G3273 recommends this fluid for Subaru applications that specify:
- e-CVT
- i-CVT FG
- Lineartronic CV-30
- Certified CVTF-II (SOA427V1660)
- High Torque CVTF
That “recommended for” list is AMSOIL’s current, sourced position, not a Subaru license number on the bottle, and I’m not going to pretend it is one. AMSOIL’s official FAQ explains why it doesn’t lock every formula into every licensing program: doing so ties a blend to specific synthetic base-stock suppliers (there is no official interchange rule for synthetics) and slows down new chemistry, because a licensed formula has to be fully re-tested after any change.
Using a recommended AMSOIL fluid does not, by itself, void a U.S. factory warranty. AMSOIL marks its products Warranty Secure, and the Magnuson-Moss Warranty Act still requires the manufacturer to show that the fluid caused a failure. The longer explanation is on Does AMSOIL void your warranty? and API and dexos. Some owners still prefer Subaru OEM CVT fluid while the car is in warranty. That’s a conservative preference, not a legal requirement.
G3273 also publishes lab results against Nissan NS-2 (FZG load stage 11 vs. 7, and a JASO LVFA anti-shudder result AMSOIL describes as 6X). Those are Nissan-fluid comparisons, not Subaru-certified tests. I mention them only so you don’t see those numbers recycled as “Subaru proof.”
AMSOIL 100% Synthetic CVT Fluid (CVT)
Best for: CVTs for which AMSOIL’s lookup and G3273 list this fluid, including the Subaru specifications named on that bulletin.
- Recommended in G3273 for the Subaru CVT specifications listed above
- Confirm year and model in the lookup. A different Subaru CVT can call for something else
- A 12.6-quart total fill is not a DIY drain-and-fill quantity; follow the service procedure
Tip: Preferred Customers get member pricing. Join at AMSOIL.com
Gasoline fuel system
This is a turbo gasoline engine, so injector and intake-valve deposits are a real topic. I point Subaru owners to AMSOIL P.i. on the same schedule AMSOIL publishes for gasoline vehicles, not as a CVT product.
AMSOIL P.i. Performance Improver (API)
Best for: Gasoline engines, including turbo Subarus, when you want AMSOIL’s one-tank injector and valve cleaner.
- Treats up to 30 gallons; AMSOIL recommends every 4,000 miles
- Not for diesel or two-stroke fuel
Tip: Preferred Customers get member pricing. Join at AMSOIL.com
Related guides
- Signature Series vs Extended-Life vs OE
- GDI and EcoBoost oil
- Transmission fluid
- Does AMSOIL void your warranty?
- All oil change kits by vehicle
Subaru, Outback, Ascent, Forester, WRX and Lineartronic are trademarks of Subaru or their owners, used only to identify compatible vehicles and fluids. Nissan is a trademark of its owner, used only to identify a comparison fluid on AMSOIL’s bulletin. No affiliation or endorsement is implied. I’m an Independent AMSOIL Dealer, not an AMSOIL INC. employee.
Frequently asked questions
What oil does a Subaru Outback take?
Is AMSOIL CVT fluid approved by Subaru?
How much CVT fluid does a 2026 Outback hold?
What about the drain plug?
Sources
Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.